Japanese

We can customize the basic parts such as the material of the device, spray type, motor capacity, spray starting method, etc. to meet each customer's request and specifications.

標準は標準タイプ、簡易は簡易タイプ、自由は自由設計タイプに対応しています。

 

Change the material used for the device

There are strong alkaline and strong acid chemicals in the chemicals.
When using such chemicals, changing the material used will extend the life of the equipment.

Material change

Gate material

The standard material is a stainless steel pipe with a steel-plated finish stand, but the material can be selected from all-stainless steel or resin pipe depending on the budget and chemicals used.


Nozzle material

The standard material is stainless steel, but you can choose from materials such as resin and brass.


Sensor case material

The standard material is steel-plated, but you can choose stainless steel or resin depending on your budget and chemicals used.



Other parts

The standard materials are stainless steel and some brass, but you can choose from materials such as all stainless steel and resin.Brass is cheaper, but stainless steel is more durable.The material and shape can be selected according to the chemicals used.

 

Change the spray type

The spray location can be selected according to the purpose of installing the disinfection device, the type of vehicle passing through, and the need for disinfection.
This will reduce installation and operating costs and enable efficient disinfection.

Type of spray point

Gate type spray type

It is a type that sprays from both sides and the top at the same time, and is used in our standard type disinfection device.This is the most used type.Place 3 to 5 spray nozzles on each side and 3 to 4 on the top.


Side spray type

It is a type that sprays from the side, and is often used in cases where disinfection of the tire part is important.
Place 3 to 6 spray nozzles on each side.


Lower spray type

The standard material is steel-plated, but you can choose stainless steel or resin depending on your budget and chemicals used.



Composite(plural) spray type

In addition to full spray on both the upper and lower sides, you can also install multiple parts that you want to spray carefully, such as 2 or 3 stations.


Handy gun

It is used in cases where necessary parts must be disinfected intensively in the event of a plague.
It is also used in cases where the surrounding area is washed or the vehicle is washed with water.

 

Change the capacity of the motor

By increasing the capacity of the motor, the number of spray points and the number of nozzles can be increased.It is possible to reliably spray the disinfectant even in a windy place or when there is a spray distance.

Motor type

Three-phase 200V 1.5kw

It is a motor for a simple type disinfection epuipment.Up to 10 spray nozzles can be supported.


Three-phase 200V 2.2kw

It is a motor for standard type disinfecting equipment.Up to 15 spray nozzles can be supported.


Three-phase 200V 3.7kw

It is a motor that drives a pump that can handle up to 20 spray nozzles.
It is used in places that are easily affected by the wind.



Three-phase 200V 5.5kw

It is a motor that drives a pump that can handle 20 or more spray nozzles.
It is used in sites with a wide intrusion front, when there are a large number of nozzles, and when a large amount of water is discharged at one time, such as when cleaning with water before disinfection.

 

Change the starting method of spray

By selecting the starting method, it is possible to set the spraying time of the chemical solution according to the size and type of vehicle.
In addition, it will be possible to reduce the time and effort required for visitors to get on and off, and to manage visitors in detail.

Types of starting method

Start with push button

Spray starts when the driver presses the start switch by himself.
By arranging multiple push buttons, the spray time can be adjusted for each vehicle.


Start with sensor

When the vehicle passes, the pump will start automatically and spray will start.
You can stop the spray with an arbitrary timer, or you can stop the spray accurately for each size of the vehicle by installing multiple sensors.


Start with a card

The spray starts when the driver inserts or displays the card.
It is possible to issue cards according to the size and type of vehicle and change the spray amount, spray time, spray position, etc.It is also possible to record admission by linking with a printer.



Start with an authentication chip

Before admission, the driver is given a tip that stores information such as admission permission and pre-registration to disinfect. This allows you to manage visitors in detail.